Leadville Trail 100 MTB Protera+

In stock, ready to ship

$199.99

or four interest free payments of $49.99 with Zip Pay

or 4 payments of $49.99 w/ Zip

Leadville Trail 100 MTB Protera+
Leadville Trail 100 MTB Protera+
Leadville Trail 100 MTB Protera+
Leadville Trail 100 MTB Protera+
Leadville Trail 100 MTB Protera+

Leadville Trail 100 MTB Protera+

$199.99

or four interest free payments of $49.99 with Zip Pay

or 4 payments of $49.99 w/ Zip

Size
Color
  • Low stock - 9 items left
  • Inventory on the way

SKU:
HL800071LV

Leadville Trail 100

Limited Time Offer

It’s no small feat racing across the high-altitude Colorado Rockies. One becomes legendary just by daring to toe the start line and leaving a piece of their legacy on the trail. Bring a piece of Leadville home with a limited-edition helmet branded with the mountains that made up your 100-mile journey.


About Protera+

The Protera+ is a helmet designed specifically for mountain biking. Ideal for enduro, trail, and cross country riders, the compact geometry is designed for those who demand the highest level of protection, style and ventilation on every ride.

About Birdworx Custom Graphics

All Birdworx Graphics are printed and laminated with the most durable materials available on the market today. We also use a unique Air Release Vinyl which allows micro air-bubbles to escape from under the graphic material.

Graphics Care

It can be common for some small areas along the edges to peel up or some small air bubbles to form. The vinyl materials have a natural memory and tendency to flatten out, especially with hot and cold temperature changes. A little bit of heat, (ex. hair dryer) gently applied, will help these edges to lay back down. A little pressure with the finger will help the adhesion process. Typically, once a graphic is worn in the sun once or twice, the adhesion will be properly cured.

Oils and sweat can also have an adverse effect on the adhesion of the graphic. We recommend soaking the unit in warm water, without soap or chemicals, once a month or as needed.

Lastly, avoid crashing. We’ve found this to be the quickest and easiest way to ruin a perfectly good set of decals. Be careful out there! Ride safe, ride often and “Ride Inspired”.

Graphics Warranty

Birdworx warrants that all Products supplied by Birdworx shall meet the applicable Product Specification, shall be free from material defects in materials or workmanship, and shall be warranted for a period of 90 days from delivery. Birdworx, at its election, shall replace any items not conforming to quality standards of material and workmanship for such Products.

Discount codes and sales are not applicable to this limited edition helmet.

Weight

SM/M - 12.38oz / 351 grams
LARGE - 13.24oz / 375 grams

- Removable and adjustable visor
- 18 vents
- Bug stop netting
- Interchangeable free pads
- Quick lock swappable chin straps
- RSR9 retention system
- Goggle compatible
- Dry Foam and X-Static antibacterial pads for efficient wicking

Sizing
  • S-M (cm55 – 58 / 21,7” - 22,8”)
  • L (cm59 – 61 / 23,2” - 24”)

- VISOR
- FREE PADS
- BUG STOP
- STRAP RETAINER

Mountain biker wearing Rudy Project Protera+ helmet with adjustable visor and goggle clip, and also Spinshield Air wide shield sunglasses
Rudy Project Protera+ mountain bike helmet features a goggle strap retention clip on the back

GOGGLE COMPATIBLE

With the rise in popularity of bike park and enduro style mountain biking, more riders are choosing to wear goggles to protect their eyes. Protera+ features a goggle strap clip on the back of the helmet to ensure proper strap retention and comfort.

EPS IN MOLD CONSTRUCTION

In-Mold technology allows us to cast the external polycarbonate outer shell directly during the injection stage of the expandable polystyrene (EPS) impact-absorbing foam. The result is a much more rigid structure which is knock-resistant and extremely light, allowing for better ventilation system. The combined action of the EPS structure, the polycarbonate cap and exo-skeleton creates resistance to the mechanical action exercised by an impact and dissipates the energy in order to prevent it from being transferred to the head of the person wearing the helmet.

EPS IN MOLD CONSTRUCTION

In-Mold technology allows us to cast the external polycarbonate outer shell directly during the injection stage of the expandable polystyrene (EPS) impact-absorbing foam. The result is a much more rigid structure which is knock-resistant and extremely light, allowing for better ventilation system. The combined action of the EPS structure, the polycarbonate cap and exo-skeleton creates resistance to the mechanical action exercised by an impact and dissipates the energy in order to prevent it from being transferred to the head of the person wearing the helmet.
Rudy Project bike helmet integrated airframe

WIDE EASY ADJUSTABLE VISOR

Protera+ features a wide easy-to-adjust visor specifically engineered to improve the protection from sun and obstacles

WIDE EASY ADJUSTABLE VISOR

Protera+ features a wide easy-to-adjust visor specifically engineered to improve the protection from sun and obstacles
Rudy Project Protera+ mountain bike helmet has removable quick change straps

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also like